Recent reports state that people have been having problems with their Samsung TV flashing Red Light, and the TV won’t switch on. This problem is typically brought on by a malfunctioning power source, but it can also occasionally be caused by an imperfect HDMI connection.
What Is Stopping the Samsung TV from Activating?
Bad Power Supply: An excessive amount of electric current may have occasionally caused the TV to short-circuit its power supply. This might have destroyed some parts of the power supply, including transistors and capacitors, or the entire unit. Because a power surge can significantly impair the efficiency and constraint of the components, this is a fairly regular occurrence with many electric components.
Incorrect Launch Configurations: Another possibility is that the TV’s launch configurations have become corrupted, which is the reason it is having this problem when it tries to turn on. To speed up startup times and preserve certain data when the TV is shutting down, launch configurations are maintained by the TV. On the other hand, if contaminated, it may completely block it from starting. In rare cases, this may also result in a problem where the TV is unable to connect to Wi-Fi.
HDMI Glitch: Occasionally, it was seen that the Samsung TV flashing red light was having trouble starting up because the owner had previously used an Xbox or PS4 with it. It’s possible that you shut the console off without first changing the HDMI source after using it, and now the console is keeping the TV from going on.
Surge Protector: If the TV is not directly plugged into the power socket and you are using a surge protector device with it, there may be a problem with the surge protector. Because it’s possible that the surge protector has gotten worn out over time and isn’t giving the TV adequate voltage to turn on.
Source Selection: Occasionally, the TV may launch with problems if the proper source is not chosen from the menu. Most customers make this pretty common mistake, which stops the TV from coming on since it is unable to receive the signal from the source correctly.
Determining the problem: Samsung TV flashing red light
It is crucial that we first make an effort to pinpoint the problem and determine the cause of its emergence. To determine whether the problem is with the television’s hardware or software, we will attempt a few simple tests. For that reason:
- Make sure the standby light under the lower right corner of your TV is on while it is turned on.
- If it is, press the “Power” button on your remote to turn it On and check if the LED is turned off.
- If it turns off, it means that the TV is connected properly to the power supply.
- Also, make sure that the screen is being powered by tapping your finger lightly on the screen.
- If the screen blinks it means that the screen is also functioning properly
- If the LED doesn’t go out or the screen doesn’t flash, there may be a problem with the power source, the screen, or your remote control. Another option is that the Samsung TV flashing red light you a black screen.
Using the techniques listed below, you can keep attempting to fix your TV.
Restart the television
Corrupted launch configurations may occasionally make it impossible for the Samsung TV to turn on properly. Thus, in order to fully remove the launch configurations—which the TV will automatically regenerate—we will be power-cycling the TV in this phase. For that reason:
- Unplug the TV completely from power and remove the power cable from the wall outlet.]
- Press and hold the “Power On” button on the TV for at least 15 seconds.
- Plug the TV back in and power it on.
- Check to see if the issue persists after turning on your TV.
Disconnecting Extras
It’s also conceivable that your TV is having trouble turning on since there may be an issue with the HDMI source selection. As a result, it is advised that you unhook any devices that you have inserted into the HDMI ports on your TV. Whether it’s a cable box, PS4, Xbox, or another device. After unplugging, turn on the TV and verify that it did so properly. Should it occur, switch to HDMI 1 as the source and attach the additional console to the HDMI 2 slot. Following that, you can choose HDMI 2 to view content on the console. Just make sure to switch back to HDMI 1 before shutting off the TV.
Making a Customer Support Request
If none of the aforementioned fixes resolved your problem, it is probably a hardware one. As a result, it is advised that you get in touch with Samsung’s customer service as soon as possible and schedule a repair for the Samsung TV. You can also submit a claim to Samsung’s customer service center if it is still covered under warranty.
FAQS
How do I fix the blinking red light on my Samsung TV?
- Unplug the TV and the One Connect Box for 30 seconds, and plug it back into a known working outlet. …
- If the red standby light comes on, then your TV has power from the working outlet. …
- If the TV still won’t turn on and the red standby light is still blinking, this is a sign that something is wrong with your TV.
Why is my TV blinking red and not turning on?
Power Supply Issues: The power supply board in the TV may be faulty, preventing the TV from receiving the necessary power to turn on. This could be due to a defective power supply unit or a blown fuse. Faulty Remote Control: Check the batteries in your remote control and ensure it’s working properly.
