Oculus Quest 2 Won’t Turn On? Try These Methods

There are several reasons why your Oculus Quest 2 won’t turn on. One possibility is that the headset’s battery is low, in which case you’ll need to charge it before using it. Furthermore, other variables may potentially be at play when you are having this problem. Your headset may not switch on in certain situations if it has experienced an unusual state as a result of an incorrect shutdown. Whatever the cause, simply keep reading as we will demonstrate how to fix the issue at hand in this post.

Functions: Oculus Quest 2 Won’t Turn On

It turns out that Oculus Quest headgear gained widespread recognition very rapidly because of the social media behemoth Meta. Most of the time, the headset functions well, but occasionally, an error message like “Can’t Reach Oculus Runtime Service” appears. It can be problematic, though, if your headset is completely off and you are left with a blank screen.

Nevertheless, there are a few workarounds you can implement to resolve the problem and restore the headset’s usual bootup behavior. A single press does not boot up the gadget, so first make sure you are holding down the Power button for at least three seconds while attempting to turn it on. You may proceed by using the techniques listed below if it still won’t boot up.

1. Carry out a hard reset

Hard rebooting is the first action we advise you to take if you encounter this problem. It turns out that in certain situations, the device might not be turning on correctly because of a forced shutdown that may have left it in an unanticipated state. In this case, a hard reboot ought to resolve the problem. You won’t lose your settings by doing this, so don’t worry.

Hard reboots are quite easy to do. Press and hold the Power button for longer than thirty seconds to accomplish this. In certain situations, you may even need to hold it for about sixty seconds. You can release the power button once the LED light turns white, which indicates that the device has been hard reset. Check to see if it resolves your issue.

2. Examine the charging cable

If your Oculus Quest 2 won’t turn on, it could be because it doesn’t have enough battery life to turn on. These gadgets have a short battery life, particularly if you spend a lot of time in virtual reality and lose track of time. It turns out that before using your Oculus Quest headset again, we advise leaving it plugged in for a while to make sure it has enough charge.

Make sure to check for the charging light indicator on the smartphone while it is charging. It’s also conceivable that the headset didn’t charge at all even though you left it to charge because of a problem with the charging cord or a loose connection. Even if you have plugged it in correctly, if there is no charging light indicator, it’s likely that your charging cord has broken. In that case, you will need to try a different charging cable to see if it charges your headset.

3. Attempt to enter the Boot Menu

There is a different way you may get your Oculus headset to boot up if it is not doing so as it should. As it leads you to a boot menu rather than the device’s usual boot screen, this is useful for troubleshooting your device or other uses.

Nevertheless, you can take advantage of this by asking the headset to boot properly after you’ve simply exited the boot screen. To accomplish this, adhere to the guidelines provided below:

1. First, press and hold both the headset’s Power and Volume Down buttons at the same time for longer than 20 seconds.
2. Once you do that, the device should boot into the boot menu. From there, you can use the volume keys to navigate to the “Exit and Device” option and then press the Power button to confirm the action. See if that gets you back in.

4. Carry out a Factory Clear

Although it is never a preferred solution, you may occasionally need to do a factory reset in order to resolve a problem. It turns out that doing a factory reset, which returns your headset settings to their original factory settings, typically solves the problem when nothing else seems to work.

There are two methods available for carrying out a factory reset. You can perform a factory reset on your phone via the Oculus app if you have linked your phone to your headset. Alternatively, you can factory reset the device from the boot menu by using the manual method. To accomplish this, adhere to the guidelines provided below:

1. First of all, you will have to boot into the boot menu. To do this, press and hold the Power and Volume Down buttons on your headset until you see the boot menu appear.
2. On the Boot Menu, use the volume keys to navigate through the options and choose the Factory Reset option.
3. Press the Power button to confirm your choice. Confirm your action on any follow-up dialogs. With that done, your headset will now be restored to its factory defaults.
4. After that, see if the headset powers on now.

FAQS

What to do if your Oculus Go won’t turn on?

Hold down the power and volume down buttons simultaneously on your headset until the bootup screen appears. 2. Use the volume buttons to navigate to the “Factory Reset” option on the menu, then select it by pressing the power button.

How do I fix the unresponsive Oculus Quest 2?

Oculus Quest 2 Controller Not Working? Here Are 7 Solutions!

1. Solution 1. Restart the Oculus Quest 2 Headset.
2. Solution 2. Clean the Battery Connectors.
3. Solution 3. Remove and Reinsert Batteries.
4. Solution 4. Replace Your Batteries.
5. Solution 5. Re-Pair the Controller.
6. Solution 6. Factory Reset Oculus Quest 2.
7. Solution 7.
8. Bottom Line.