AirPlay Not Working on Samsung TV? Here is How to Fix it

If the operating system of the host computer (a Mac, for example) or the TV’s firmware is out of current, AirPlay not working on Samsung TV. Incorrect configuration of the Samsung TV’s settings, such as IPv6, Auto Protection Time, and others, may possibly be the root of the problem. This problem occurs when a user tries to AirPlay media from an Apple device to a Samsung TV but is unsuccessful. Occasionally, the Samsung TV won’t appear as an available

The fixes listed below should help you repair Airplay, but not until you go over some fundamental troubleshooting procedures:

Make sure Apple AirPlay is supported by your Samsung TV.

Check to see if the AirPlay problem is resolved by restarting every device (including the TV, networking equipment, and Apple products), removing the power cables for five minutes, plugging them back in, and turning the devices on.

After turning off Bluetooth, see if using AirPlay fixes, the issue. If not, try turning on Bluetooth and choosing the TV to resolve the AirPlay problem. whether the problem still arises, see whether resetting the TV’s Bluetooth connection to the Apple device (such as an iPhone) resolves the AirPlay problem.

Make sure the problem isn’t being caused by a VPN on any other devices, including the TV, an Apple device, or a router. Check to see whether the AirPlay not working on Samsung TV problem is fixed by connecting the devices without a Wi-Fi extension (if applicable). Make that the problem isn’t being caused by a network protection program like pf Blocker NG or Pi-hole.

1. Try connecting: AirPlay not working on Samsung TV

Retrying the network in the Samsung TV’s settings may resolve the issue if Airplay was temporarily disabled by a malfunction of the network modules. Go to Settings on the Samsung TV, select General, then click Network. After that, choose Network Status and press the Retry option.

Reconnect your host device’s Wi-Fi (such as your iPhone) and verify that Airplay is functioning properly on your Samsung TV.

2. Go into the Samsung TV’s settings and reactivate Airplay

Disabling and re-enabling Airplay in the Samsung TV’s settings may resolve the issue, which may have been caused by a brief fault of the device.

1. To access Apple Airplay Settings, navigate to General in your TV’s settings.
2. Select Airplay now, and turn it off.
3. After that, turn on Airplay again and see if the Samsung TV is compatible.

3. Adjust the Airplay code requirement and reset the paired devices

If the code requirement for Airplay is not set up correctly and AirPlay not working on Samsung TV, you can run into an issue with it. The issue might be resolved by setting the code to always be needed, or the other way around.

1. Open your TV’s Settings and choose General.
2. Open Apple Airplay Settings now, and make sure that the Require Code is set to Always.
3. Then check if Airplay is working fine on the Samsung TV.
4. If not, then check if setting the Require Code to Use Password Instead resolves the Airplay issue.
5. If the issue persists, check if resetting the paired devices in the Require Code option solves the problem.

If that still doesn’t work, follow steps 1 and 2 again to access About Airplay and Apple Airplay Settings on the Samsung TV. Now, if applicable, return to the original version and see whether it fixes the problem.

4. Update the Samsung TV’s firmware to the most recent version

Updating the firmware on the Samsung TV could fix the Airplay issue if it is caused by outdated firmware.

1. Open the Settings app on your Samsung TV, then choose Support.
2. Open Software Update now, then choose Update Now.
3. If an update of the firmware of the TV is available, let it download and install.
4. Once the TV’s firmware is updated, check if AirPlay is working again with the Samsung TV.

5. Install the most recent build of the OS on the host device

An out-of-date operating system on the host computer (such as a Mac) could be the cause of the Samsung TV’s AirPlay problem. Possibly the solution is to update the host device’s operating system to the most recent build.

1. Open Software Update by launching the Mac’s System Preferences.
2. If an update is available, click on Update Now (or Upgrade Now).
3. Once the Mac OS update is applied, check if AirPlay is working fine

6. Turn off the 5GHz band on your router and turn on the 2.4 GHz band

Due to a history of network problems on the 5GHz band, Samsung TVs may not support AirPlay if they are connected to a 5GHz network via the host device. In this instance, the issue might be resolved by turning off the 5GHz network and using the 2.4GHz band solely. Using a web browser, navigate to the router’s web portal and enter your login credentials.

1. Click on Settings now and choose Wireless.
2. Subsequently, select the 2.4GHz option and, if necessary, uncheck the 5GHz option.
3. Now apply your changes and connect your devices (i.e., the Samsung TV and the host device) to the 2.4GHz band. If the TV or the host device asks to connect to the 5GHz band, click Cancel.
4. Then check if the Samsung TV is working fine with AirPlay.
5. If not, check if reverting the Wi-Fi password to the default sorts out the AirPlay issue.

7. Disable the Samsung TV’s auto protection time

AirPlay may not function if you have configured the Samsung TV’s Auto Protection Time to prevent burn-in, which occurs when the device automatically identifies the same image on the screen for a predetermined amount of time. Turning off Auto Protection Time might fix the issue.

1. Go to the TV’s settings, select the General tab, and then choose System Manager (located in the right pane).

8. Go to the TV Settings and activate the IP Remote

Since the IP Remote is required for select Samsung TV models for AirPlay to function, if it is not activated in the TV’s settings, AirPlay may not function on those models. The issue might be resolved by turning on the IP Remote in the Samsung TV’s settings.

1. Launch the Samsung TV Settings and select General.
2. Then open Network and select Expert Settings.
3. Now enable IP Remote and then check if AirPlay is working fine.

9. Go into the Samsung TV’s settings and disable IPv6

If your Samsung TV is having trouble with IPv6 networking, AirPlay might not function. The issue can be resolved by turning off IPv6 in the Samsung TV’s settings. Then check if the AirPlay is working fine on the Samsung TV. If the issue persists, consider disabling IPv6 on the host device (like a Mac) as well.

1. Open General in the settings of your Samsung TV and select Network.
2. Now access Expert Settings and disable IPv6
3. hen check if the AirPlay is working fine on the Samsung TV. If the issue persists, consider disabling IPv6 on the host device (like a Mac) as well.

10. Adjust the TV’s DNS Settings

Changing the DNS server on your TV can help if your network is having trouble resolving the web domains required for Apple AirPlay to function.

1. Go to the Network tab in the settings of your TV and select Network Status.
2. Click on the button of IP Settings and go to DNS Settings
3. Select Enter Manually and input the following values for the Google DNS
4. Apply your changes and turn off the TV.
5. Then wait for at least one minute and power on the TV to check if the AirPlay issue is resolved.

 11. Upgrade the firmware on the router

The Samsung TV and host device’s connectivity may be hampered by outdated router firmware, which could result in the AirPlay problem. Changing the firmware on the router can fix the issue.

1. Using a web browser, go to the router’s web portal and enter your login information.
2. To access the Administration (or System) area, open the router’s Settings.
3. To find the most recent upgrades, select Firmware Update, Router Update, or Software Update. Install the update if there is one available.
4. Once the router’s firmware is updated, check if the Samsung TV is clear of the AirPlay issue.
5. Disable Firewall of the Host Device

AirPlay not working on Samsung TV if the firewall of the host device is hindering its operation, so disabling the firewall of the host device (e.g., a Mac) may solve the problem.

Warning: Proceed at your own risk as modifying the firewall settings of any device may expose your data and devices to threats.

1. Launch your Mac’s System Preferences and open Security & Privacy

1. Select Firewall, click on the padlock icon, and enter your administrator password.
2. Open Firewall Options and ensure that the Block All Incoming Connections is not enabled.
3. Enable the option Automatically Allow Built-in Software to Receive Incoming Connections and then check if the AirPlay issue is resolved.
4. If that did not resolve the issue, then check if disabling the Firewall of the Mac solves the AirPlay issue.
5. If you cannot disable the firewall via the GUI, check if executing the following command in the Terminal resolves the issue:

13. Return the Samsung Smart Hub to its factory settings

If Samsung’s Smart Hub installation is defective, it may prevent consumers from downloading third-party apps to their TVs via AirPlay. The Samsung Smart Hub’s AirPlay problem might be fixed by returning it to factory defaults. Because everything will be deleted, don’t forget to back up any important data and information (such as app login credentials).

1. Navigate to the Settings on the Samsung TV and choose Support.
2. Proceed to Self-Diagnostics by selecting Device Care.
3. Once the Smart Hub is reset to defaults, set it up again and check if AirPlay is working properly with the Samsung TV.

14. Return your television to its factory settings

The TV’s firmware may become corrupt, rendering Air Play unusable. Restoring the Samsung TV to its original settings could help fix the AirPlay issue.

1. Open the Samsung TV’s Settings and select Support.
2. Access Self Diagnostics and choose Reset. If the Reset option is not located in the Self Diagnostics menu, check the Settings > General menu
3. Enter the TV’s PIN, if prompted, and once the TV is reset to factory defaults, set it up as a new device.
4. Check if the AirPlay is now working correctly on the Samsung TV. You may also attempt to use the SmartThings app for setup.

If none of the solutions works for you, consider adding the Samsung TV’s IP address to the DMZ in the router settings. If that does not resolve the issue, you may need to factory reset the host device (e.g., factory reset the iPhone).

FAQS

Why is my Airplay not working on my Samsung TV?

Start by making sure that your TV supports AirPlay. Check that your Samsung TV and your Apple device are on the same Wi-Fi network. Often, restarting your devices will be enough to resolve AirPlay problems. If all else fails, try resetting your Samsung to factory settings

Why is AirPlay not connecting to my TV?

Make sure that your AirPlay-compatible devices are turned on and near each other. Check that the devices are updated to the latest software and are on the same Wi-Fi network. Restart the devices that you want to use with AirPlay or screen mirroring