Many Nintendo Wii owners who purchased a (new controller) sync a Wii remote for their system encounter some difficulties configuring the new device. Using the new remote with your Wii is not possible because it simply will not pair over Bluetooth. Try the following steps to see if they help you connect your controller if you have a Nintendo Wii and are having trouble setting up your new remote.
Switching off wireless devices: Sync a Wii Remote
Make sure the sensor bar is centered either above or below your TV device before attempting the alternatives. Additionally, you ought to be three to ten feet away from the TV.
Verify that the sensor bar is not being interfered with by any other infrared light sources. Remove any radio frequencies that might be interfering with the console and remote as well. Switching off wireless devices such as mice, keyboards, and cell phones will be a smart move.
Solution 1: Remove the battery cover
Turn on your Wii first, then wait for the console to finish setting up. Now remove the new controller’s battery cover. Then, until all of the blue LEDs on the front light up and blink, click the sync button on the new controller.
Now locate and push the sync button on the Wii system underneath the SD card port. When the controller is successfully linked to your console, its blue LEDs should cease blinking, indicating that everything went as intended.
Use solution 2 if you’re still having trouble attaching your controller.
Solution 2: Test Out Some New Batteries
Weak batteries can occasionally prevent your controller from syncing properly with your system. Try the following technique if you tried the previous approach and are still having trouble getting the new controller to sync. For the new controller, buy new batteries and swap them out for the old ones. After that, turn off the console’s power supply and remove the console’s power cord right away. After unplugging the cord for at least 30 to 60 seconds, re-plug it. After that, watch till the console is ready and has finished booting. Try syncing your new controller once more, repeat solution 1, and adhere to all the instructions.
There is a rumor circulating that you must briefly hold down the sync button. It’s not necessary to hold down the sync button because this rumor is exactly that—a rumor. Your new controller should properly sync a Wii remote console and the Nintendo Switch sucks online if you follow all the instructions.
FAQS
How do I get my Wii Remote to sync?
Press and release the SYNC Button just below the batteries on the Custom Wii Remote; the Player LED on the front of the Wii Remote will blink. While the lights are still blinking, quickly press and release the red SYNC Button on the Wii console. When the Player LED blinking stops and stays lit, the syncing is complete.
How do I sync my Wiimote to my computer?
You can connect and sync a Wii remote to your Win 11 PC by following the method.
- Go to setting => Bluetooth & Devices => Devices.
- Scroll down and click on more devices & printer settings.
- A new window will be open.
- Click on add a device.
- New window popup and start searching the devices.
Why can’t I sync my Wii Remote?
Install a fresh set of batteries. Clear all syncs from the Wii console. Reset the Wii remote, then sync a Wii Remote with the Wii console. Try using another Custom Wii Remote, if possible
