Some consumers have reported that they are unable to get any response from their Xfinity Remote not working, regardless of which button is touched. This issue could be caused by a number of things, such as dead batteries or improper remote programming. Please follow the instructions as we walk you through a number of solutions in this post to assist resolve this issue. In addition to other services like the internet, Xfinity offers many TV remote devices. In addition to the previously mentioned remote issue, you may have other problems when using these services, such as Affinity WiFi not working. The malfunctioning of your remote control may have multiple causes. Let’s investigate the potential causes for a better read before diving into the remedies to address the issue. Rechargeable batteries The issue could be caused by dead batteries, which would leave the remote powerless.
Determining Potential Causes; Xfinity Remote Not Working
Programming remotely — Another possibility is that the TV remote’s programming is incorrect. For the remote to work, it must be correctly programmed.
Problem with an app or remote from time to time, a problem with the app or the Xfinity remote not working itself could be the cause and a reset would be necessary to get things working again.
After determining the potential causes, let’s move on to the different approaches to fixing the problem. comprehension.
Use the Xfinity Remote programme
It’s crucial to make sure your remote is programmed correctly. Distinct TV sets have different ways of communicating with remote controls, which might have an impact on features like volume control and channel switching.
To correctly connect to the TV, your Xfinity Comcast remote won’t work and needs to be linked and programmed if it isn’t already. Depending on the remote model you have, there may be different stages involved, but we’ll go over the most popular ones here.
Remote Programme XR16:
- Press the Voice button once while pointing the remote control towards the Xfinity Flex TV box.
- Complete the voice control pairing by following the on-screen directions.
- To utilize the Voice button with a TV or other audio device, press and hold it while saying “programme remote.”
- After pairing is complete, see if the remote is working by following the on-screen directions.
- Press and hold the I + Xfinity buttons until the on-screen instructions appear in order to use an Xfinity X1 TV box using the XR15 remote.
Give the code that appears on the screen. Once paired, verify that the remote is operating properly.
Press and hold the Xfinity and Mute buttons until the light at the top of the remote turns green to pair it with a TV.
Reset XR15 Remote:
- On the XR15 remote, press and hold the A (triangle)and D (diamond) buttons until the light blinks, which should take around 5 seconds.
- To complete the factory reset, press 9-8-1 on your remote.
Reset XR11 Remote:
- Press and hold the Setup button until the LED transitions from red to green.
- Press 9-8-1. The LED blinking green twice indicates the remote has been reset.
Reset Xfinity Box
- The problem might reside with your Xfinity box. You may need to reset the box by pressing and holding the Reset button for about 5 seconds.
- Alternatively, you can reset the box through the Xfinity My Account app.
If none of these fixes the problem, you might think about contacting Xfinity customer service. They can provide more advice and, if required, set up a service visit or new remote.
FAQS
How do I fix my Xfinity unresponsive remote?
Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green. Press 9-8-1. The LED will blink blue three times to indicate that the remote was reset.
How do I reset my Xfinity TV remote?
Simultaneously press and hold the Info (i) button and the Home button (house icon) until the status light on the remote blinks. This takes about 5 seconds. Press Power, then Last (<- arrow), then Volume Down (-) on your remote in sequence to complete a factory reset.
