Samsung produces a wide range of electrical devices, such as televisions, refrigerators, and smartphones. Customers are drawn to Samsung televisions by their stunning screens, user-friendly interfaces, streaming app integration, and smart connectivity, But the Samsung TV Remote not working As of late, many reports have been in about the television’s remote control not working at all, except the Power button.
We will go over a few of the possible causes of this issue in this post, along with workable solutions that will guarantee the issue is completely resolved.
What is the cause of the malfunctioning of Samsung TV Remote not working?
We looked into the problem and came up with a few fixes that worked for the majority of our users. We also investigated the following causes, which are the reasons the error occurs:
- Interference: It is always a good idea to remove other electronic devices from close to the television as they may cause distortion to the electric signal from the remote. Examples of these gadgets include lights, mobile phones, radios, and so on.
- De-Synchronization: Occasionally, there may be a synchronization issue between the television and the remote control. This can cause the remote to malfunction or the television to fail to receive the electric signals that the remote control sends.
We’ll move on to the solutions now that you have a basic understanding of the nature of the issue. you prevent conflicts, make careful you implement these in the exact order that they are given.
Solution 1: Turn off and then back on the TV.
The television’s launch settings may need to be reset in order for the remote control to occasionally work again. As a result, we will power-cycle the TV in this phase to fully reinitialize its configurations. For that reason:
- After turning on the TV, unplug the power straight from the outlet.
- For thirty seconds, press and hold the power button on the TV.
- Replug the power in and switch on the television.
To see if the problem still exists, try using the remote.
Solution 2: Adjusting the TV and Remote Sync
It’s possible that the television and remote lost synchronization, which is why the television isn’t picking up the remote’s signals. As a result, we will be re-syncing the television and remote control simultaneously in this phase. For that reason:
- Turn on the TV and move approximately 10 inches away from it.
- Point the Remote at the bottom right side of the Television.
- Press and hold the “Back” arrow key and the “Pause” button until the “Pairing Complete” message appears on the TV screen.
- Use the remote and check to see if the issue persists.
FAQS
Why is my Samsung remote not working except power button?
If it is the remote, it may need a pair of fresh batteries or a reset. Check out our guide for charging the smart remote for your Samsung Smart TV or Freestyle for all the information needed on how to charge the solar remote.
Why is my TV remote only turning on and off?
However, the most common reasons for a Samsung TV Remote not working are battery issues, paring issues, or infrared sensor issues. Press the power button while pointing the remote control at your TV. Make sure the LED indicator on the TV blinks. If not, your remote does not have enough power remaining in the batteries
Why are only some buttons working on my remote?
Remote control buttons have a conductive thin layer beneath. As time goes by this layer may get damaged because of friction and loose conductivity. As a result, although the batteries are full and you apply great pressure on the button they do not function.
